Swann PRO-752 Guide d'installation télécharger pdf (Page 7)

Connection Diagram

1. Connect the BNC output from the camera to the

extension cable.

2. Attach the RS485 plug to the wires on the

camera’s cable.

3. Connect the DC jack on the end of the extension

cable to the included power adapter.

4. Connect the two wires on the end of the extension

cable to your DVR’s RS485 plug, and connect to

the back of the DVR.

5. Plug the BNC output into a channel input on the

DVR.

This is the Device: PTZ setup screen

from the DVR-4000’s menu system.

Your DVR’s PTZ screen will look

similar or identical to this one.

Check your DVR’s documentation

for more information about the PTZ

Conﬁguration Menu on your DVR.

1 2 3 4 5 6 7 8

Pas de commentaire

Swann PRO-752 Guide d'installation Page 7