Swann INTERCOM DB-815 Manuel d'utilisateur télécharger pdf (Page 7)

Connecting Wiring

To attach the wiring correctly:

Attach wires to terminals 1-4 on the rear of the indoor Unit by sliding the •

U-shaped connection under the screw terminals.

Screw into place, being careful not to overtighten. •

Attach a control for an electric lock/door-strike to terminals 5 & 6 and controls •

for an electric gate to terminals 7 & 8 (if applicable).

Attach the bare wire ends into the connections to connections 1-4 on the •

outdoor Unit using a small screwdriver or a pen (or similar) to push in the small

button atop each wire terminal, and insert the wire.

Release the button and the wire will be clamped ﬁrmly in place.•

Remember: The small U-shaped connection attaches to the indoor unit, whilst the

plain wire end attaches to the outdoor unit.

Suggested wiring solution:

No. Color Function

1 Green Audio

2 Black Ground

3 Blue Video

4 Brown Power

Suggested solution only. All four wires in the cable are identical in every respect except their color. Thus,

provided terminal 1 on the indoor Unit is connected to 1 on the outdoor Unit, and so forth, the color

of the wire used is not particularly important.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Swann INTERCOM DB-815 Manuel d'utilisateur Page 7