Swann SW242-2LP Manuel d'utilisateur télécharger pdf (Page 9)

- 6 -

User Manual

5.2 Camera Select

If a channel is disabled, the system will display “OFF” on the monitor; this

channel will not be recorded. (Refer to 5.3 Record Select)

5.3 Record Select

Manually set which channels are allowed to record.

Note: If no channels are selected, an error message will appear briefly on the

screen when record is selected. “1234” indicates all cameras are set to record.

The DVR system can display 4

cameras at once or you can limit the

number of cameras displayed to save

HDD space.

Press [

SEL] to modify setting, or

press [CH1], [CH2], [CH3] and [CH4] to

set each channel separately.

[ Menu]: Push to enter system menu

[

Up] and [ Down]: Move the cursor

[

SEL]: Select/modify settings

[

Menu]: Press exit/previous menu

MAIN MENU

CAMERA SELECT 1234

RECORD SELECT 1234

RESOLUTION EACH

RECORD FRAME 25

RECORD QUALITY HIGH

SCHEDULE SET

MISCELLANEOUS MENU

HARD DISK SET

MOTION SET

VIDEO MODE PAL

FACTORY RESET

(UP，DOWN) MOVE (SELECT) CHANGE

PRESS (MENU) TO EXIT

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

Pas de commentaire

Swann SW242-2LP Manuel d'utilisateur Page 9